Stand-alone simulated analog meter

oled-vu-meter-600

DuWayne S blogged about his stand alone simulated analog meter project:

Thinking about what values I would like to display, I came up with three basic items.  A S-meter when in receive, and a power output display when in transmit.  In transmit, I would also like to have the capability of measuring VSWR.  Thinking about the switching functions required for this I will need one control line that monitors  transmit/receive, this can come from the PTT or key line in the transceiver.  Then  I use a second control line to select either power or VSWR when the T/R line is in transmit.  Another control line can do the same for the S-meter or some other display when in receive.  Since this is based on a VU meter, I will use that for the secondary function in receive.  Now looking at the signal lines I need to measure, they are the AGC line for S-meter, audio signal for VU meter.  And in transmit, the forward and reverse power levels will take care of power and a computed VSWR reading.

See the full post at DuWayne’s Place blog.

from Dangerous Prototypes https://ift.tt/2KuljGl

Related Post

Deja un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *